(DISCONTINUED) Honeywell Voyager 1200g Programming Guide
Honeywell Voyager 1200g Programming Guide
Important: You may need to print this guide on a laser printer to scan correctly.
Unlike previous models, the new Voyager 1200g comes with most of the required settings already set for Kennel Connection and there is no need to enter a “programming mode” with this new model. Out of the box, this scanner will scan inventory items into KC and scan them onto your invoices while moving to the next line. If you plan to use this scanner for daycare key tag check-in/outs, you’ll need to simply scan the “Add tab suffix” barcode below. Once scanned, it should properly scan pets’ key tags into the system.
**If you do not hear the barcode scanner play a little chime/beep, it did not scan**
Helpful Hints:
· In KC, make sure to go into File, System options, Local tab and enable your barcode scanner and options in the lower right-hand corner.
· If using this barcode scanner for scanning pet key tags into daycare and you want it fully automated, be sure to go into File, System Options, Daycare and place a check mark next to “Auto-create booking and Check-in.”
· If your barcode scanner is NOT scanning anything into Kennel Connection at all, open Notepad on your computer and make sure the cursor is flashing in there. Scan a barcode. If the barcode shows up in notepad, your device may not be configured to properly work with Kennel Connection. Please try the “Add tab suffix” scan again. IF nothing scans into notepad, there is a hardware issue within that device. Please try a new USB port or a different computer. If it still fails, you’ll need to contact the vendor.
Related Articles
(DISCONTINUED) Honeywell Voyager MS9520 Wired Barcode Scanner Configuration
Honeywell Voyager MS-9520 USB Barcode Scanner Configuration Guide (Discontinued Model) For USB port connections: Plug the end of the barcode scanner cable into an available USB port on your computer. The barcode scanner should beep to let you ...(DISCONTINUED)Honeywell Voyager 1202g WIRELESS Barcode Scanner Configuration Instructions
Honeywell Voyager 1202g WIRELESS Barcode Scanner Configuration Instructions Here are the instructions for programming your wireless barcode scanner. Print out this barcode sheet before proceeding: Attached. Please note: You MUST print the barcode ...Barcode Scanner Installation Guide KC7
Barcode Scanner Installation Guide KC7 You can use the barcode scanner for two purposes: You can scan retail items onto an invoice instead of searching for the code and you can automatically create appointments and check the pet in/out for the ...Zebra DS2208 Barcode Scanner Setup
This 2D scanner is designed for all types of retail environments and scans very aggressively at all angles, in all light conditions, and on most forms of media including cell phone screens. This scanner was built with future proofing in mind where it ...Barcode scanner is not working for check-ins
Remedy 1: Be sure Kennel Connection is set to accept checkins with the scanner. Click on File, System Options, Local tab. Check each box to set your preferences. Be sure to hit Apply when done. Remedy 2: The scanner must be configured properly. ...